Effect of Hydration–Dehydration Processes on the Structure and Porosity of Detemplated Silica Fibers

A study was carried out on the conditions of template removal (calcination or extraction by solvents) and hydration–dehydration processes on the hexagonal structure and porosity of detemplated fibers. The hydration–dehydration cycle leads to a decrease in fiber porosity, especially in fiber detemplation by extraction with surfactant solvents such as ethanol and acetic acid.     

Pervaporative transport modelling in a ternary system: ethyltertiarybutylether/ethanol/polyurethaneimide

The study deals with the analysis of diffusion and mass transfer modelling during pervaporation in a true ternary system involving a polar liquid mixture (ETBE/EtOH) and a polar block copolymer (polyurethaneimide or PUI). A survey of methods of pervaporative transfer modelling in ternary systems is first developed. From differential permeation experiments carried out with both pure liquids, it appears that both permeants obey a Fickian law. Moreover, the diffusional behaviour is consistent with Long's model, which has thus been assumed for the related ternary system. An extension of the Brun's model is then derived, which takes into account the diffusion coupling as well the significant deviation from sorption ideality. From a practical point of view, the calculated values of fluxes show generally good agreement with the experimental results, although a small deviation occurs for mixtures of low ethanol content. Diffusion coefficients of both pure solvents corresponding to transient or steady state are compared. A very good agreement is found for the aprotic permeant (ETBE). whereas the diffusion coefficient of ethanol in transient state is only the quarter of the value corresponding to steady state. The results are discussed in comparison with related investigations in the literature, involving specific liquid-polymer interactions.     

Dielectric Relaxation Study of Liquids Having Chloro Group with Associated Liquids. I. Chlorobenzene with Methanol, Ethanol, and 1-Propanol

The complex permittivity for chlorobenzene–alcohol binary mixtures have been determined over the frequency range of 10 MHz to 20 GHz, at 15, 25, 35, and 45°C, using the time-domain reflectometry (TDR) method for 11 concentrations of each chlorobenzene–alcohol system. The alcohols used were methanol, ethanol, and 1-propanol. The values of static dielectric constant, relaxation time, the corresponding excess properties, the Redlich–Kister coefficients up to the third order, the Kirkwood correlation factor, and thermodynamic parameters of the mixtures have been determined. The excess permittivity is found to be negative for chlorobenzene–methanol and chlorobenzene–ethanol, whereas it is positive in the 1-propanol rich region. The excess inverse relaxation time is negative for all the systems studied here. The Kirkwood effective correlation factor increases with an increasing in the molecular size of the alcohol, but decreases with increasing temperature.     

Preparation and dehydration behaviour of thomsonite with ideal chemical composition

Thomsonite with ideal chemical composition and with an ordered framework structure was synthesised hydrothermally from zeolite Na?A, which was ground to X-ray amorphous, with 0.05 mol dm^?3 CaCl₂ solution at 200°C. The dehydration behaviour of the prepared thomsonite was examined by TG-DTA. It was revealed that thomsonite lost most of zeolitic water below 450°C in three steps at about 180°, 340° and 390°C. The peak profiles of, the two higher-temperature endotherms were sharp and similar, and the weight loss at each step was approximately equal.     

Acid activated montmorillonite and vermiculite clays as dehydration and cracking catalysts

Treatment of montmorillonite and vermiculite with hydrochloric acid results in an overall increase in acidity and acidic sites. IR and DSC studies of base adsorbed catalysts have revealed the heterogeneity of surface acidity on the activated catalysts. Clay catalysts have been found to dehydrate 1-butanol to 1-butene, which directly isomerizes tocis- andtrans-2-butenes, confirming the presence of Lewis and Brönsted acid sites. Cumene cracking studies using the clay catalyst also confirm the presence of Brönsted acid sites. The temperature and concentration of acid have been found to have a significant influence on the catalytic activity.     

Study of the drying zirconia gel-precipitates using thermal analysis

Thermoanalytical techniques (TG, DTG, DTA and EGA) can be helpful in studying gel compositions and relating the chemical history and the role of the precipitant to the chemical properties of gels. The objective of our work was to determine the influence of the initial conditions in the reaction mixture on the product characteristics. Zirconia gels were prepared by the gelprecipitation method by the hydrolysis of zirconium tetrachloride dissolved in methanol. The substitution of water by methanol was chosen in order to obtain a reaction medium in which better control of the hydrolysis and condensation reactions of the zirconium precursor were achieved and thus also better control of the final properties of the dried zirconia gel-precipitates could be obtained. The nature of the hydrated zirconia gels obtained during the gelation process is strongly influenced by the conditions of the reaction mixture, e.g. concentration of the zirconium precursor, the mixing rate and particularly by the amount of water added. To distinguish between various types of water in the gel-precipitates, the furnace atmosphere and the partial water pressure were altered appropriately. It was shown that initial zirconium to water molar ratio has a significant effect on the properties of the final products. It was assumed that, according to the preparation conditions, three different types of water are present in the formed zirconia gel-precipitates. Modification of the dehydration processes of zirconia gel-precipitates enables control of the final microstructural and surface properties of the dried gels which are suitable for further catalysts support as well as mixed oxide preparation.     

A Kinetic Aspect of the Thermal Dehydration of Dilithium Tetraborate Trihydrate

The reaction process of the thermal dehydration of dilithium tetraborate trihydrate, Li₂B₄O₇3H₂O, was reinvestigated from a viewpoint of reaction kinetics. On the basis of the results of thermogravimetry, constant rate thermal analysis, powder X-ray diffractometry, infrared spectroscopy and scanning electron microscopy, it was confirmed that the reaction proceeds via three consecutive kinetic steps characterized by different activation energies. The first and second kinetic steps, accompanied by the destruction of the original crystal structure of the reactant, seem to be assigned to the surface and internal reactions, respectively. During the third kinetic step, the thermal dehydration of hydrated amorphous intermediate, produced at the second kinetic step, and crystallization of the final dehydration product, Li₂B₄O₇, are likely to take place concurrently.This revised version was published online in November 2005 with corrections to the Cover Date.     

Hydration and Lyotropic Melting of Amphiphilic Molecules: A Thermodynamic Study Using Humidity Titration Calorimetry

The hydration of the lipid 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) and of the cationic detergent dodecyltrimethylammonium bromide (DTAB) has been studied by means of isothermal titration calorimetry (ITC), gravimetry, and infrared (IR) spectroscopy. During the experiments films of the amphiphiles are perfused by an inert gas of variable relative humidity. The measurement of adsorption heats using ITC represents a new adaptation of adsorption calorimetry which has been called the humidity titration technique. This method yields the partial molar enthalpy of water upon adsorption. It is found to be endothermic with respect to the molar enthalpy of water on condensation for the water molecules which interact directly with the headgroups of POPC and DTAB. Consequently, the spontaneous hydration of the amphiphiles is entropy driven in an aqueous environment. IR spectroscopy shows that hydration is accompanied by the increase in the conformational and/or motional freedom of the amphiphilic molecules upon water binding. In particular, a lyotropic chain melting transition is induced at a certain characteristic relative humidity. This event is paralleled by the adsorption of water. The corresponding exothermic adsorption heat is consumed completely (POPC) or partially (DTAB) by the hydrocarbon chains upon melting. Differential scanning calorimetry was used as an independent method to determine transition enthalpies of the amphiphiles at a definite hydration degree. Water binding onto the headgroups is discussed in terms of hydrogen bonding and polar interactions. The adsorption isotherms yield a number of 2.6 tightly bound water molecules per POPC and DTAB molecule.     

Determination of Aldehydes and Ketones in Fuel Ethanol by High-Performance Liquid Chromatography with Electrochemical Detection

A new methodology was developed for analysis of aldehydes and ketones in fuel ethanol by high-performance liquid chromatography (HPLC) coupled to electrochemical detection. The electrochemical oxidation of 5-hydroxymethylfurfural, 2-furfuraldehyde, butyraldehyde, acetone and methyl ethyl ketone derivatized with 2,4-dinitrophenylhydrazine (DNPH) at glassy carbon electrode present a well defined wave at +0.94 V; +0.99 V; +1.29 V; +1.15 V and +1.18 V, respectively which are the basis for its determination on electrochemical detector. The carbonyl compounds derivatized were separated by a reverse-phase column under isocratic conditions with a mobile phase containing a binary mixture of methanol / LiClO_4(aq) at a concentration of 1.0 × 10⁻³ mol L⁻¹ (80:20 v/v) and a flow-rate of 1.1mL min⁻¹ . The optimum potential for the electrochemical detection of aldehydes-DNPH and ketones-DNPH was +1.0 V vs. Ag/AgCl. The analytical curve of aldehydes-DNPH and ketones-DNPH presented linearity over the range 5.0 to 400.0 ng mL⁻¹, with detection limits of 1.7 to 2.0 ng mL⁻¹ and quantification limits from 5.0 to 6.2 ng mL⁻¹, using injection volume of 20 μL. The proposed methodology was simple, low time-consuming (15 min/analysis) and presented analytical recovery higher than 95%.     

Diminished Respirative Growth and Enhanced Assimilative Sugar Uptake Result in Higher Specific Fermentation Rates by the MutantPichia stipitis FPL-061

A mutant strain ofPichia stipitis, FPL-061, was obtained by selecting for growth on L-xylose in the presence of respiratory inhibitors. The specific fermentation rate of FPL-061, was higher than that of the parent,Pichia stipitis CBS 6054, because of its lower cell yield and growth rate and higher specific substrate uptake rate. With a mixture of glucose and xylose, the mutant strain FPL-061 produced 29.4 g ethanol/L with a yield of 0.42 g ethanol/g sugar consumed. By comparison, CBS 6054 produced 25.7 g ethanol/L with a yield of 0.35 gJg. The fermentation was most efficient at an aeration rate of 9.2 mmoles O₂ L^-1 h^-1. At high aeration rates (22 mmoles O₂ L^-1 h^-1), the mutant cell yield was less than that of the parent. At low aeration rates, (1.1 to 2.5 O₂ L^-1 h^-1), cell yields were similar, the ethanol formation rates were low, and xylitol accumulation was observed in both the strains. Both strains respired the ethanol once sugar was exhausted. We infer from the results that the mutant, P.stipitis FPL-061, diverts a larger fraction of its metabolic energy from cell growth into ethanol production.